Interní lithiová baterie je zalitá uvnitř toho čipu a její plus pól není vyveden na žádný z externích pinů čipu. Plus pól interní baterie je zapojen uvnitř čipu přímo na elektronický přepínač, který automaticky odpojí baterii když externí napájení na pinu Vcc vzroste na úroveň 3V a naopak zas připojí když klesne pod 3V viz přiložené schéma. Takže na žádném z externích pinů čipu nelze zkontrolovat aktuální stav napětí interní baterie.rnbw píše:Len neviem, ako je pripojeny - ziadny z pinov nechyba
Zdroj: datasheet M48Z02
The M48Z02/12 also has its own power-fail detect circuit. The control circuitry constantly monitors the single 5 V supply for an out of tolerance condition. When VCC is out of tolerance, the circuit write protects the SRAM, providing a high degree of data security in the midst of unpredictable system operation brought on by low VCC. As VCC falls below approximately 3 V, the control circuitry connects the battery which maintains data operation until valid power returns.