Nejde mě bulid pro PIC

[eXilim]

Zdravím, nevím proč ale at se snažím zkompilovat jakejkoliv zdroj. kod v MPLAB IDE (6.6x) tak mi to pokaždý vyhodí tudne hlášku:

Warning[215] C:\PIC\BLIK.ASM 1 : Processor superseded by command line. Verify processor symbol.
Message[301] C:\PROGRAM FILES\MPLAB IDE\MCHIP_TOOLS\P16F84A.INC 35 : MESSAGE: (Processor-header file mismatch. Verify selected processor.)
Error[126] C:\PROGRAM FILES\MPLAB IDE\MCHIP_TOOLS\P16F84A.INC 114 : Argument out of range (must be greater than or equal to 255)
Error[126] C:\PROGRAM FILES\MPLAB IDE\MCHIP_TOOLS\P16F84A.INC 115 : Argument out of range (__MAXRAM must be used first)
Error[126] C:\PROGRAM FILES\MPLAB IDE\MCHIP_TOOLS\P16F84A.INC 115 : Argument out of range (__MAXRAM must be used first)
Error[126] C:\PROGRAM FILES\MPLAB IDE\MCHIP_TOOLS\P16F84A.INC 115 : Argument out of range (__MAXRAM must be used first)
Error[126] C:\PIC\BLIK.ASM 3 : Argument out of range (not a valid config register address)
Warning[226] C:\PIC\BLIK.ASM 16 : Destination address must be word aligned
Warning[226] C:\PIC\BLIK.ASM 19 : Destination address must be word aligned
Warning[226] C:\PIC\BLIK.ASM 22 : Destination address must be word aligned
Warning[226] C:\PIC\BLIK.ASM 25 : Destination address must be word aligned

Už si s tím nevím rady... Díky za každou pomoc

[Atlan]

zacni tym ze tu das zdrojak..... a nastav si procesor v MPllabe...Configure - select device-

[Burajko]

Mas iny header subor ako navoleny procesor.(alebo mas zalinkovane dva rozdielne include subory)