Kenwood kdc-w4044u PROTECT
Moderátor: Moderátoři
Kenwood kdc-w4044u PROTECT
Po zapnutí mi rádio hlásí PROTECT. Vypájel jsem IO KS a stále stejná hláška. Je možné, že hlásí chybu právě proto že tam koncák není?
..to bude jen ňákej odpůrek
Idú ti všetky napätia z IC4?
http://elektrotanya.com/kenwood_kdc-w40 ... nload.html
Vymazanie error z e2prom
Try HOLDING the <3> and <6> key down while pressing the reset and continue to hold after releasing the reset button.
You should get a display that says "DC ERR" or "DC OK". If "DC ERR" appears press and hold <1>.
Now Press <2> and you should get a display that says "DC #". # being anything from 0 to 4. if not 0 press and hold <2
http://elektrotanya.com/kenwood_kdc-w40 ... nload.html
Vymazanie error z e2prom
Try HOLDING the <3> and <6> key down while pressing the reset and continue to hold after releasing the reset button.
You should get a display that says "DC ERR" or "DC OK". If "DC ERR" appears press and hold <1>.
Now Press <2> and you should get a display that says "DC #". # being anything from 0 to 4. if not 0 press and hold <2
„Hľadáme nepoznané, spoznávame nehľadané. Strácame to cenné, ceníme si až stratené. Milujeme všetko zradné a zrádzame milované.”
Pozdravuje Vás Martin
Pozdravuje Vás Martin